Machinery
Used Machinery
Used wood processing machinery, assessed for condition and application fit.
Loading used machinery…
Could not load used machinery. Please try again later.
No machines match the current filters. Reset the filters or tell us what you are looking for.
Combined woodworking machines
Felder saw-spindle moulder
FELDER
Used saw-spindle moulder with a 2050 mm sliding table, Ø 315 mm saw blade, tilting spindle and separate 5.5 kW motors for the saw and the spindle moulder.
Edge banding machines
Homag automatic edge banding machine
HOMAG
Used automatic edge banding machine for panels up to 60 mm and edgebanding 0.4–3 mm, with pre-milling, corner rounding, NC control and a feed speed of 8–14 m/min.
Sliding table saws
Robland sliding table saw
ROBLAND
Used sliding table saw with 3200 mm cutting length, 1350 mm cutting width, Ø 400 mm blade tilting manually to 45° and a scoring unit with its own 0.75 kW motor.
Four side moulders
Weinig four side moulder
WEINIG
Used four side moulder with 6 spindles, 230 mm working width, 170 mm working height, 6–24 m/min feed speed and 50 kW total installed power.
Drilling and boring machines
Rapid knot hole drilling machine
RAPID
Used knot hole drilling machine with 4 drilling spindles, a two-speed 0.45 / 0.6 kW motor (1400 / 2800 rpm), 100 mm height adjustment and a 790 x 490 mm worktable.
Planers
TOS Svitavy double-sided planer
TOS SVITAVY
Used double-sided planer for planing the top and bottom faces in one pass, with 810 mm planing width, workpieces up to 200 mm thick and cutterblock motors of 10 kW and 7.5 kW.
Planers
Bäuerle thicknesser
BÄUERLE
Used thicknesser with 630 mm planing width, workpieces up to 220 mm thick, 8 mm maximum depth of cut, a 4-knife cutterblock and a 5.5 kW motor.
Combined woodworking machines
REX tenoning and cross-cut machine
REX
Used tenoning and cross-cut machine for timber beams, with an 800 mm main saw blade, 315 mm cutting height, swivelling up to ±60° and tenoning units above and below.
Sawing machines
OGAM multi-rip saw
OGAM
Used multi-rip saw with crawler chain feed, 350 mm saw blades on a single arbor, workpieces up to 110 mm thick, 300 mm feed chain width and an 18 kW motor.
Sliding table saws
Format-4 sliding table saw
FORMAT-4
Used sliding table saw with 3200 mm cutting length, 1300 mm cutting width, Ø 400 mm blade tilting to 45°, scoring unit and motorised blade height and tilt adjustment.
Sliding table saws
Paoloni sliding table saw
PAOLONI
Used sliding table saw with 3200 mm cutting length, 1350 mm cutting width, 120 mm cutting height, blade tilting manually to 45° and a scoring unit with its own 0.55 kW motor.
Presses
Joos veneer press
JOOS
Used hydraulic veneer press with two electrically heated platens, 2500 x 1100 mm working area, 4 pressing cylinders and 380 mm daylight.
Planers
Jaroma 2 side planer
JAROMA
Used 2 side planer with bottom and top cutterblocks, 400 mm working width, max. 170 mm working height, 6 / 12 m/min feed and 6 kW + 6 kW motor power.
Edge banding machines
Brandt automatic edge banding machine
BRANDT
Used automatic edge banding machine for panels up to 50 mm and edgebanding 0.4–3 mm, with pre-milling, end trimming, fine trimming, scraping and buffing.
Have a machine to sell?
Submit the machine details, current condition, location and available documentation. PROMACH will review the information and determine whether a direct purchase proposal or a brokerage arrangement may be suitable.